Question 241- 270

Q241) In Huawei FusionCompute, which of the following data storage types does not support disk capacity expansion?

• a) Non-virtualized local disk
• b) Virtual SAN
• c) NAS
• d) FusionStorage

Show Answer

Q242) In Huawei FusionCompute, which of the following statements about storage is false?

• a) A physical storage device can serve as storage resources.
• b) A storage device corresponds to a logical unit in physical storage, for example, a LUN.
• c) A datastore can be IP SAN, FC SAN, or NAS.
• d) A VM disk file is in VHD format.

Show Answer

Q243) In Huawei FusionCompute, when multiple VMs write data to the shared disk at the same time, the application software must control access to the disk to prevent data loss.

• a) True
• b) False

Show Answer

Q244) In Huawei FusionCompute, the resources in a cluster consist of hosts and associated storage and

Q245) When FusionCompute uses Internet Protocol storage area network (IP SAN) storage, the steps for creating disks include:
1. Create storage resources.
2. Add storage ports on the host.
3. Add datastores.
4. Create disks.
The operation sequence should be: ()

• a) 1-2-3-4
• b) 1-3-4-2
• c) 2-1-3-4
• d) 4-2-1-3

Show Answer

Q246) In Huawei FusionCompute, when viewing the disk status, the administrator finds that the value of Used Capacity (GB) is less than that of Capacity (GB). The possible cause is: ( )

• a) The disk type is Shared.
• b) The disk mode is thin provisioning.
• c) The disk status is Unavailable.
• d) The disk mode is Dependent.

Show Answer

Q247) In Huawei FusionCompute, which of the following statements about VM storage live migration is false?

• a) Storage live migration can be performed between different datastores.
• b) Storage live migration can be performed between different storage resources.
• c) Storage live migration can be performed between different storage devices.
• d) Storage live migration can be performed between different virtual disks.

Show Answer

Q248) In Huawei FusionCompute, after data in a VM is deleted, the disk size will not be automatically reduced. When users write data to the VM next time, the space released by the VM will be used.

• a) True
• b) False

Show Answer

Q249) The VM disk file format on FusionCompute is ( ).

• a) OVF
• b) VMDK
• c) VHD
• d) DHT

Show Answer

Q250) Not Available

Q251) In Huawei FusionCompute, which of the following VM disk configuration modes requires the least physical storage space?

• a) Independent & persistent
• b) Independent & nonpersistent
• c) Thin provisioning
• d) Ordinary

Show Answer

Q252) In Huawei FusionCompute, which of the following statements about shared disks are true?

• a) A disk of this type can be attached to only one VM.
• b) A disk of this type can be attached to multiple VMs.
• c) The VM does not support datastore change for this type of disks.
• d) The VM with a disk of this type attached does not support the snapshot function.

Show Answer

Q253) Which of the following storage resource types are supported by Huawei FusionCompute?

• a) FC SAN
• b) IP SAN
• c) NAS
• d) Advanced SAN
• e) FusionStorage

Show Answer

Q254) Not Available

Q255) After Huawei FusionCompute is deployed using the unified installation and deployment tool, the system automatically creates a cluster. What operations can administrators perform on the cluster?

• a) Changing the cluster name.
• b) Exporting the cluster to a local directory
• c) Adding cluster description
• d) Moving the cluster to a specified folder

Show Answer

Q256) In Huawei FusionCompute the VLAN ID of a port group is set to 10, which indicates ( ).

• a) The system will untag the data frames with the VLAN 10 tag that pass through the port group and then forward the data frames.
• b) The system will add the VLAN 1 O tag to the data frames without a VLAN tag that pass through the port group and then forward the data frames.
• c) The system will discard the data frames with a tag other than VLAN 10 that pass through the port group.
• d) The system will change the tag of data frames with a non-VlAN-10 tag that pass through the port group to VLAN 10 and then forward the data frames.

Show Answer

Q257) In Huawei FusionCompute, administrators can view the DVS ports connected to VMs.

• a) True
• b) False

Show Answer

Q258) In Huawei FusionCompute, users can create VMs by importing a VM template file. Which of the following file format is not supported?

• a) ova
• b) qwcow2
• c) vmdk
• d) ovf

Show Answer

Q259) Which of the following operating systems allows users to format disks in New Technology File System (NTFS) format?

• a) Linux
• b) UVP
• c) Windows
• d) Unix

Show Answer

Q260) In Huawei FusionCompute, which of the following is not a restriction for VM live migration?

• a) The shared disk cannot be attached
• b) The VM cannot use raw device mapping (RDM) datastores.
• c) The VM must be in the Running state.
• d) The destination host is not in maintenance mode.

Show Answer

Q261) Not Available

Q262) When attaching a disk to a VM on Huawei FusionCompute, users have the following requirements: When a snapshot is created for the VM, no snapshot is created for the disk. When a VM is restored using the snapshot, the disk is not restored and all data is written to the disk permanently. Which of the following modes of disks should be selected?

• a) Dependent
• b) Independent
• c) Independent & persistent
• d) Independent & persistent

Show Answer

Q263) Huawei FusionCompute allows users to add hosts in batches. The administrator fills in host information based on the template provided by the system and imports the host information at a time.

• a) True
• b) False

Show Answer

Q264) Which of the following statements about Huawei FusionCompute HA is false?

• a) This function enables a VM to reboot whenever the VM encounters with a failure.
• b) If VM data is stored in the shared storage, the unsaved data will not be lost if a fault occurs.
• c) With HA enabled, the system periodically detects the VM status If detecting a VM fault caused by a physical server fault, the system automatically migrates the VM to another physical server and restarts the VM to allow rapid restoration of the VM services.
• d) Administrators can set different HA policies based on importance of VMs.

Show Answer

Q265) In Huawei FusionCompute, port groups are classified as common port groups, trunk groups, and hybrid port groups.

• a) True
• b) False

Show Answer

Q266) Which of the following operations for creating port groups in Huawei FusionCompute is false?

• a) Set the name of the port group to test.
• b) Set the port type to Common.
• c) Set the VLAN ID to 5000.
• d) Enter "This is a test port." in the description

Show Answer

Q267) In Huawei FusionCompute, the VLAN ID of a port group is set to 0, which indicates ( ).

• a) The VLAN tag of the data frames that pass through the port group will be set to 0.
• b) Only data frames with the VLAN 0 tag can pass through the port group
• c) Data frames with a VLAN tag are not allowed to pass through the port group.
• d) The data frames that pass through the port group Will not be modified.

Show Answer

Q268) In Huawei FusionCompute, the virtual NICs of each VM are connected to the ports of the virtual switch. To facilitate simultaneous configuration and management of multiple ports, the ports with the same network attributes are added to the same port group.

• a) True
• b) False

Show Answer

Q269) Which of the following statements about port groups in Huawei FusionCompute are true?

• a) One port group can be configured with multiple IP addresses.
• b) A Port group functions as a distributed virtual Switch.
• c) All virtual ports in a port group have the same attributes
• d) There are two types of port groups: common port groups and trunk port groups.

Show Answer

Q270) In Huawei FusionCompute, if there are just a few physical NICs on the server, multiple planes can be co-deployed and logically isolated by using VLANs.

• a) True
• b) False

Show Answer